Question 1

What is the diameter and thickness of the acrylic lid on your part #BVV3GSS View answer

Asked 3 ´years ago | Best Value Vacs 3 Gallon Stainless Steel Vacuum Chamber

Question 2

What size vessel would this fit on? View answer

Asked 3 ´years ago | 3 Gallon Vacuum Chamber Digital Heating Jacket

Question 3

What is the load capacity in pounds that each shelf can support? View answer

Asked 3 ´years ago | EVERY PRODUCT BUT HYDRO FOR WHOLESALE STORE > 16CF ECO Vacuum Oven - 8 Individually Heated Shelves, LED display, LED's

Question 4

Does this fit one of your stainless vessels? View answer

Asked 3 ´years ago | 3 Gallon Vacuum Chamber Digital Heating Jacket

Question 5

Do you sell the replaceable connections for the "Chemglass Filter Flask DURAN"? View answer

Asked 3 ´years ago | Chemglass Filter Flask DURAN® Replaceable Hose Connections

Question 6

Drying Oven Shelves View answer

Asked 3 ´years ago | ECO Oven Shelves

Question 7

What is the difference between premium stabilizer and the regular? View answer

Asked 3 ´years ago | Premium Wood Stabilizer (Superior to Cactus Juice)

Question 8

What mm size paper would fit good inside of one of these with the tension ring? Not sure which size to order. 4". View answer

Asked 3 ´years ago | Pre-Cut Stainless Steel Mesh for Tri-Clamp Filter Plates 100 Mesh (150 Micron)

Question 9

Does the jacket flow under the vessel as well? View answer

Asked 3 ´years ago | Fully Jacketed Containers

Question 10

Could you tell me the wall thickness between the vessel and the jacket? View answer

Asked 3 ´years ago | Fully Jacketed Containers

Question 11

2 questions- 1) Is this lid acceptable for wood stabilization? 2) Which configuration fits your GlassVac chamber? View answer

Asked 3 ´years ago | 1.5 Gallon Cold Trap (2QT Tank) Dry Ice, Liquid Nitrogen

Question 12

is this unit electro polished and is it 316L? View answer

Asked 3 ´years ago | 8 inch Parts Sale > Stainless Steel Tri-Clamp Hopper

Question 13

What is the I.D. dimension of SKU: CC-6 View answer

Asked 3 ´years ago | Stainless Steel Condensing Coils

Question 14

Can it be used on open blast tube? View answer

Asked 3 ´years ago | BVV Tri-Clamp Inline Filter Housing Kit with Free Sample Cartridge

Question 15

What is the maximum vacuum this part is rated for? View answer

Asked 3 ´years ago | KF-25 Bellow Fitting Hose - KIT

Question 16

What is the temperature range of the oven? View answer

Asked 3 ´years ago | 0.9CF ECO Vacuum Oven - 4 Wall Heating, LED display, LED's - 4 Shelves Standard

Question 17

Does this piece come with the clamp? View answer

Asked 3 ´years ago | Conical Tri-Clamp Reducer

Question 18

Is rod threaded both ends View answer

Asked 3 ´years ago | Threaded Lab Stand Rod

Question 19

Difference between elite professional View answer

Asked 3 ´years ago | 1LB Apollo Top Fill Closed Loop Extractor

Question 20

Hi What is the thickness? View answer

Asked 3 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 21

Can this be mixed with an essential to use as a room spray View answer

Asked 3 ´years ago | 200 Proof Ethanol - USP Kosher - Excise Tax Included

Question 22

Hi what is all included in this is there everything other then the butane and the material and the vaccum needed View answer

Asked 3 ´years ago | 90G XL Mini Top Fill Closed Loop Extractor

Question 23

Hi I got these with the set up I purchased, I was wondering where is this put in and how is it used View answer

Asked 3 ´years ago | 304 Stainless Steel Ball Bearings Packs

Question 24

What are the pressure and temperature limits on a 6" ? View answer

Asked 3 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 25

Is the gauge removable? I’d like to replace with a digital one. View answer

Asked 3 ´years ago | Glass Vac 3 Gallon WIDE Stainless Steel Vacuum Chamber

Question 26

Is the unit flow directional ie; inlet low or high View answer

Asked 3 ´years ago | 1.5 Gallon Cold Trap (2QT Tank) Dry Ice, Liquid Nitrogen

Question 27

Is the lid glass ? View answer

Asked 3 ´years ago | Best Value Vacs 2 Gallon Aluminum Vacuum Chamber

Question 28

What's the sight glass for and do with this attachment? How does the shower head look like? View answer

Asked 3 ´years ago | Tri-Clamp Build-A-Lid with BVV 316SS Full Bore Valves

Question 29

is this lid compatible with wood stabilization products? View answer

Asked 3 ´years ago | 12.75 Vacuum Chamber Lid w/ Universal Silicone Gasket

Question 30

Does the .09 neocision gasket fit .09 bvv eco? View answer

Asked 3 ´years ago | Replacement Vacuum Oven Gaskets

Question 31

Can an endcap with fittings be clamped onto this to make a closed vessel? View answer

Asked 3 ´years ago | Tri-Clamp Welded Bottom Base

Question 32

what is the length from the bottom of the ground glass fitting? View answer

Asked 3 ´years ago | 5L Glass Thermowell 24/40

Question 33

Can these be fabricated to 10 inch sizes View answer

Asked 3 ´years ago | Silicone 2500 Mesh (5 Micron)

Question 34

What are the temperature and pressure limits of the 6" disks? View answer

Asked 3 ´years ago | 5 Micron Stainless Steel Sintered Filter Plate with Viton O-ring

Question 35

do you have this in stock? View answer

Asked 3 ´years ago | Harvest Right Scientific Freeze Dryers - Large

Question 36

How much pressure can this withstand? Basically I'm curious if I can use this as a replacemesigsightass on a miner? View answer

Asked 3 ´years ago | Polycarbonate Sight Glass Kit

Question 37

is this fume hood requires to be ducted or it's ductless (recycled/filtered air?) thank you! View answer

Asked 3 ´years ago | 3′ Fisher American Fume Hood

Question 38

How is the filtering material secured? Can other stainless steel meshes be used? View answer

Asked 3 ´years ago | Tri-Clamp Filter Plate

Question 39

How much mass can this screen hold at one time? View answer

Asked 3 ´years ago | Tri-Clamp Filter Plate

Question 40

Can you adapt CRC on the professional version of this unit? View answer

Asked 3 ´years ago | 2LB Apollo Top Fill Closed Loop Extractor

Question 41

Fitting on 20lb tank View answer

Asked 3 ´years ago | 20LB High Purity USA 70/30% N-Butane/Propane Blend - 99.5% Guaranteed - Buy 2 Get 1 Free (Add 3 To Cart)

Question 42

What is the difference in the explorer and the professional closed loop? View answer

Asked 3 ´years ago | 45G Mini Top Fill Closed Loop Extractor

Question 43

Is this a good option for using with a closed loop extractor. I.e. fill and then recover? View answer

Asked 3 ´years ago | DOT-Approved Recovery Cylinders

Question 44

How big is the weighing surface? View answer

Asked 3 ´years ago | Postal Scale 110lb Max, Ounces, Grams, Lbs, Kg

Question 45

well then what is the point of this diptube then? View answer

Asked 3 ´years ago | Extractor Butane Catch Can / Resin Trap with Dip Tube

Question 46

what is the length of the 135 gram tube? View answer

Asked 3 ´years ago | 1.5" Open Blast Extractors 45-270g

Question 47

how does this work ? View answer

Asked 3 ´years ago | Certified Jacketed Diamond Miner

Question 48

Can you specify capacities for the V2 model? View answer

Asked 3 ´years ago | Closed Column Conversion Kit

Question 49

What is different with professional setup versus the explorer setup? View answer

Asked 3 ´years ago | XL Mini Closed Loop Extraction Starter Kit

Question 50

Will this work for butane/propane mix when connected to a closed loop extractor? View answer

Asked 3 ´years ago | DOT-Approved Recovery Cylinders

Browse by Topic

Tools