Steel Q&A

Question 1

Can these be used in your basic bi directional loops? View answer

Asked 2 ´years ago | Steel > 5 Micron Stainless Steel Sintered Filter Plate with Viton O-ring

Question 2

I'm looking for replacement gaskets for Cold Trap 4" Stainless Steel SKU: CT80010-B View answer

Asked 2 ´years ago | Cold Trap 4" Stainless Steel

Question 3

is this 1/4" on both ends? also how long is the hose in 10'? 7'? View answer

Asked 2 ´years ago | 1/4" 37 Degree Female JIC Braided Stainless Steel Hose

Question 4

is this 1/4" on both ends? View answer

Asked 2 ´years ago | 1/4" 37 Degree Female JIC Braided Stainless Steel Hose

Question 5

What is the pressure and temperature rating of the jacket and vessel? View answer

Asked 2 ´years ago | Fully Jacketed Base with 1.5" Tri-Clamp Drain Port

Question 6

Max Pressure Rating View answers

Asked 2 ´years ago | Baffled Tri-Clamp Condenser

Question 7

how long is part FR250150 View answer

Asked 2 ´years ago | Flat Tri-Clamp Reducer

Question 8

Will this work with a can? View answer

Asked 2 ´years ago | Tri-Clamp Topcap with Valve and 1/4" 37 Degree JIC Flare -40 to 230C

Question 9

What size bracket do I use to mount a 10" Injection coil? View answer

Asked 2 ´years ago | Hang On Bracket Pipe Hangers

Question 10

Are these pure stainless or are they chrome plated? View answer

Asked 2 ´years ago | 304 Stainless Steel Ball Bearings Packs

Question 11

What are the design temperature and pressure ranges of the condenser? View answer

Asked 2 ´years ago | Tri-Clamp Condenser V2

Question 12

Please advise on the distance from the back wall plate to the pipe ring on a 2" unit. View answer

Asked 2 ´years ago | Pipe Hangers with Bracket Mount

Question 13

What is the volume of the funnel? View answer

Asked 2 ´years ago | Stainless Steel Tri-Clamp Hopper

Question 14

What is the pressure rating on the spool's process and also jacket? View answer

Asked 2 ´years ago | Fully Jacketed Spools

Question 15

is this made of stainless steel or aluminum? View answer

Asked 2 ´years ago | KF-50 Clamp

Question 16

What is the ID and OD?, thickness View answer

Asked 2 ´years ago | Steel > Replacement Gasket for Dutch Weave Sintered Filter Disks - Silicone

Question 17

What is the PSI rating on this tri-clamp? View answer

Asked 2 ´years ago | Tri-Clamp Single Hinge Clamp

Question 18

How much does the 8" version weigh? View answer

Asked 2 ´years ago | Hemispherical Tri-Clamp Reducer with Welded Ring Stand

Question 19

Do I need a molecular sieve using a passive 1 lb extractor on butane? View answer

Asked 2 ´years ago | Molecular Sieve Filter Drier

Question 20

What is the max width of the rack that these can hang on? View answer

Asked 2 ´years ago | Hang On Bracket Pipe Hangers

Question 21

Looking for 3.5” silicone gaskets. Do you have them? View answer

Asked 2 ´years ago | Steel > Replacement Gasket for Dutch Weave Sintered Filter Disks - Silicone

Question 22

What grade Stainless Steel is this? View answer

Asked 2 ´years ago | Pipe Hangers with Bracket Mount

Question 23

F-40 Stainless Steel Tri-Clamp End Cap View answer

Asked 2 ´years ago | KF-40 Stainless Steel Tri-Clamp End Cap

Question 24

Whats the recommended max pressure and weight this can withstand? View answer

Asked 2 ´years ago | Tri-Clamp Quadpod

Question 25

Can this disk withstand 100 psi of ram force? View answer

Asked 2 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 26

What are the dimensions of the mounting plate with holes in it if I were to purchase the 6" size? View answer

Asked 2 ´years ago | Pipe Hangers with Bracket Mount

Question 27

Are these safe for vacuum use? View answer

Asked 2 ´years ago | Stainless Steel Condensing Coils

Question 28

What pressure is the inner coil rated to? View answer

Asked 2 ´years ago | Coil in Coil Heat Exchanger - 40ft

Question 29

FNPT Ports View answer

Asked 2 ´years ago | Fully Jacketed Containers

Question 30

Which side goes up? The two sides look very different View answer

Asked 2 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 31

Does the jacket flow under the vessel as well? View answer

Asked 2 ´years ago | Fully Jacketed Containers

Question 32

Could you tell me the wall thickness between the vessel and the jacket? View answer

Asked 2 ´years ago | Fully Jacketed Containers

Question 33

is this unit electro polished and is it 316L? View answer

Asked 2 ´years ago | Stainless Steel Tri-Clamp Hopper

Question 34

What is the I.D. dimension of SKU: CC-6 View answer

Asked 2 ´years ago | Stainless Steel Condensing Coils

Question 35

What is the maximum vacuum this part is rated for? View answer

Asked 2 ´years ago | KF-25 Bellow Fitting Hose - KIT

Question 36

Does this piece come with the clamp? View answer

Asked 2 ´years ago | Conical Tri-Clamp Reducer

Question 37

Hi What is the thickness? View answer

Asked 2 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 38

Hi I got these with the set up I purchased, I was wondering where is this put in and how is it used View answer

Asked 2 ´years ago | 304 Stainless Steel Ball Bearings Packs

Question 39

What are the pressure and temperature limits on a 6" ? View answer

Asked 2 ´years ago | 316L Stainless Dutch Weave Sintered Filter Disk 1 micron and up - BUNA-N

Question 40

What's the sight glass for and do with this attachment? How does the shower head look like? View answer

Asked 2 ´years ago | Tri-Clamp Build-A-Lid with BVV 316SS Full Bore Valves

Question 41

Can an endcap with fittings be clamped onto this to make a closed vessel? View answer

Asked 2 ´years ago | Tri-Clamp Welded Bottom Base

Question 42

What are the temperature and pressure limits of the 6" disks? View answer

Asked 2 ´years ago | Steel > 5 Micron Stainless Steel Sintered Filter Plate with Viton O-ring

Question 43

How is the filtering material secured? Can other stainless steel meshes be used? View answer

Asked 2 ´years ago | Tri-Clamp Filter Plate

Question 44

How much mass can this screen hold at one time? View answer

Asked 2 ´years ago | Tri-Clamp Filter Plate

Question 45

Question about Solid Tri-Clamp End Caps View answer

Asked 2 ´years ago | Solid Tri-Clamp End Caps

Question 46

hello do you have different sizes available for the perforated filter? we would need 20 40 and 60 mesh View answer

Asked 2 ´years ago | BVV™ Inline Strainer 304 Stainless Steel

Question 47

What's the difference between 30# options? View answer

Asked 2 ´years ago | Stainless Steel LP Tank - Includes Gas and Liquid Fill/Drain Ports

Question 48

Do you have this in 8" & 12" View answer

Asked 2 ´years ago | Plastic End Caps for Tri-Clamp Parts - 2 Pack

Question 49

On the 1.5", the plate is just over 1" while the rubber is 1.5". Is this correct? Do you use both plates at once? View answer

Asked 2 ´years ago | Stainless Steel Extractor Packing Rod for Material *Fits Tri Clamp spools

Question 50

I have a 3" open blast 1lb extractor and am looking to upgrade, just want to make sure this is the correct part View answer

Asked 2 ´years ago | 3mm Open Blast Shower Head End Caps

Steel Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools