Extractor Accessories Q&A

Question 1

Do you have this in a 4 inch? View answer

Asked 2 ´months ago | 6" x 1.5" x (2) 1/4" FNPT Tri-clamp Endcap BVV™

Question 2

How long is the connecting rod between the pipe clamp and the mounting plate? Specifically on the on the 3",3.5"4" View answer

Asked 3 ´months ago | Pipe Hangers with Bracket Mount

Question 3

What size for the mini xl closed loop system? View answer

Asked 4 ´months ago | 316L SS Tri-Clamp Ball Valve

Question 4

do you have a pressure rating for this item? part# 06BM View answer

Asked 5 ´months ago | 3/8" FNPT Stainless Steel Block Manifold

Question 5

Can you tell me the dimensions of the #30 and #50 with attachments please. It's going in a freezer and need to know View answer

Asked 5 ´months ago | Stainless Steel LP Tank - Includes Gas and Liquid Fill/Drain Ports

Question 6

Do these fit your pro series high pressure clamps? View answer

Asked 6 ´months ago | Bolt Kit For High Pressure Clamps

Question 7

What is the pressure rating on 4 inch spool? View answer

Asked 7 ´months ago | 4" Tri-Clamp Spools

Question 8

Will BVV JCI Hose fit on top? View answer

Asked 7 ´months ago | Tri-Clamp Topcap with Valve and 1/4" 37 Degree JIC Flare -40 to 230C

Question 9

Could you please prove the dimensions for the #25 tank? Do all variants have the same connections size? View answer

Asked 7 ´months ago | Jacketed Stainless Steel LP Tank with Internal Condensing Coil and Dip Tube

Question 10

Is a recovery pump required for this to work? View answer

Asked 10 ´months ago | Extractor Accessories > 1LB Inline CRC Kit

Question 11

What is the outside diameter of the pipe? View answer

Asked 10 ´months ago | KF-25 Stainless Steel Spools

Question 12

Would this be safe to use with a cantap tool on whip it butane View answer

Asked 10 ´months ago | Extractor Accessories > BVV™ 1/4" Manual Shut-Off Ball Valve

Question 13

What is the length of 6in x 4in reducer? View answer

Asked 11 ´months ago | Conical Tri-Clamp Reducer

Question 14

What is the tolerance of this gauge in inHg? View answer

Asked 11 ´months ago | Glycerine Filled Vacuum Gauge Custom, for our Chamber Lids Only

Question 15

Do u have to flip it when running gas out of it into extraxtor View answer

Asked 11 ´months ago | DOT-APPROVED RECOVERY CYLINDERS

Question 16

FER200 dimensions looking for the length of ferrule? View answer

Asked 1 ´year ago | Tri-Clamp Ferrule

Question 17

How tall is the 4”x2” View answer

Asked 1 ´year ago | Conical Tri-Clamp Reducer

Question 18

Do you have this in a 12"? 1.5 tri clamp elbow View answer

Asked 1 ´year ago | 1.5" Tri-Clamp x 8" 90 Degree Bend

Question 19

Can these gauges be calibrated? View answer

Asked 1 ´year ago | Extractor Accessories > Standard Glycerine Filled Vacuum Gauge 1/4" NPT BASE

Question 20

Does this come with a gasket? View answer

Asked 1 ´year ago | Tri-Clamp Topcap with Valve and 1/4" 37 Degree JIC Flare -40 to 230C

Question 21

What is the temperature range of the coils? View answer

Asked 1 ´year ago | Stainless Steel Condensing Coils

Question 22

what's the 5/16-18 threaded stem length? View answer

Asked 1 ´year ago | Glycerine Filled Vacuum Gauge Custom, for our Chamber Lids Only

Question 23

what is the pressure rating of the 1/4" fitting? View answer

Asked 1 ´year ago | 37 Degree FJIC Swivel Union

Question 24

What is the max temp on this unit View answer

Asked 1 ´year ago | Extractor Accessories > High Pressure Inline Sight Glass

Question 25

What's the name for this style with no skirt on the inside, and do you have materials compatible with toluene? View answer

Asked 1 ´year ago | Replacement Gasket for Dutch Weave Sintered Filter Disks - Buna-N

Question 26

Can you please provide ID/OD and thickness dimensions for the 8-in and 10 in filter plate rings View answer

Asked 1 ´year ago | Filter Plate Ring

Question 27

Sounds like you can only use 1 can at a time before you need to put your system under vacuum again. Is that correct View answer

Asked 1 ´year ago | Can Tap Tool

Question 28

what is the pressure rating on these? View answer

Asked 1 ´year ago | 6" Tri-Clamp Spools

Question 29

Does the Icarus Extractor base have a pressure rating? View answer

Asked 1 ´year ago | Extractor Accessories > The Icarus Extractor Base

Question 30

Does this come with the sight glass? View answer

Asked 1 ´year ago | 6" Pre-Built Hemispherical Lid with BVV 316SS Full Bore Valves

Question 31

Is this valve suitable to use on the bottom of a collection vessel temperature wise View answer

Asked 1 ´year ago | BVV™ 1/4" MNPT x 1/4" FNPT Stainless Steel Miniature Butterfly Handle Ball Valve -20 to 230C

Question 32

What is the pressure rating for this part? View answer

Asked 1 ´year ago | Bottom Weld Tri-Clamp Filter Plate

Question 33

What is the inner diameter of the thermowell? Basically what size diameter probe can I use with this? View answer

Asked 1 ´year ago | 1/4" NPT Stainless Steel Thermowell

Question 34

How tall is the 6" to 1.5" reducer? View answer

Asked 1 ´year ago | Conical Tri-Clamp Reducer

Question 35

what are the respective lengths of the 3"x1.5" and 4"x1.5" conical reducers? View answer

Asked 1 ´year ago | Conical Tri-Clamp Reducer

Question 36

What are the dimensions of this hose? ID? OD? View answer

Asked 1 ´year ago | 1/4" 37 Degree Female JIC Braided Stainless Steel Hose

Question 37

How tall is the 2" to 1.5" reducer? View answer

Asked 1 ´year ago | Conical Tri-Clamp Reducer

Question 38

Is this basically a 4" deep splatter platter? View answer

Asked 1 ´year ago | Tri-Clamp Welded Bottom Base

Question 39

What is the max working pressure? Can I get 1/2" npt on one end? View answer

Asked 1 ´year ago | 1/2" 37 Degree JIC Braided Stainless Steel Hose

Question 40

what range of dosages does this gun do and in what increments? View answer

Asked 1 ´year ago | Lab Dosing Gun

Question 41

Will these fit the 1 pound Apollo so I can have different options for material for example, 36in for 2 pounds? View answer

Asked 1 ´year ago | 3" Tri-Clamp Dewaxer Columns

Question 42

why is a brass nut used with stainless steel? View answer

Asked 1 ´year ago | Bolt Kit For High Pressure Clamps

Question 43

What are the inside and outside diameters of these gaskets? View answer

Asked 1 ´year ago

Question 44

what is the internal volume in ml? View answer

Asked 1 ´year ago | 6" Tri-Clamp Tall Sight Glass

Question 45

Id of tube View answer

Asked 1 ´year ago | Stainless Steel Condensing Coils

Question 46

What is the volumetric capacity of the unit? View answer

Asked 1 ´year ago | Cold Trap 4" Stainless Steel

Question 47

What is the temperature range of the heating jacket? View answer

Asked 1 ´year ago | Molecular Sieve Filter Drier W/ Heating Jacket

Question 48

What thread size is the device connection? Not the process side but where we thread in the probe. View answer

Asked 1 ´year ago | 1/4" NPT Stainless Steel Thermowell

Question 49

Which way is in and which way is out they are not labeled?? View answer

Asked 1 ´year ago | Stainless Steel Condensing Coils

Question 50

What is the weight of the 30 View answer

Asked 1 ´year ago | Stainless Steel LP Tank - Includes Gas and Liquid Fill/Drain Ports

Extractor Accessories Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools